|
Install the ATR-72
into
your FS2004 or FS2002 \aircraft folder. If you haven't already
done so, follow the instructions on our installation
page.
Press the 'S'
key to see the 2D cockpit; press the 'S' key again to see the
3D cockpit and twice more to see the aircraft from the spot plane
view. Here's a quick walk around:
- Press 'E'
to start the engine.
- Press F8 to
see the flaps slowly drop into position. Press F5 to retract
the flaps for takeoff.
- Press the
stick forward and back to see the elevator move up and down.
- Press the
yoke from side to side to see the rudder and ailerons move.
- Press Shift
'E' to open and close the door.
|