for Microsoft FSX, FS2004 & FS2002
Piper Aircraft manufactured only two high-wing, tricycle-gear aircraft: the PA-22 Tri Pacer and PA-22-108 Colt.
The original Piper PA-22 Tri Pacer was powered by a 125hp Lycoming O-290-D engine. It was also the last aircraft in production to have metal tubing and fabric covering. Piper Corporation had high sales of the Tri-Pacer designs.
The four-seat PA-22 was produced from 1949 to the early 1960s. A smaller 2-seat Colt based on the Tri-Pacer was used as a trainer.
Designer Brian Gladden has created this set of six different Tri-Pacers for FSX, FS2004 and FS2002 users: Yellow Stripe, Red Stripe, Blue Stripe with Wheel pants, Green stripe with Wheel pants, Red Stripe with Floats and Green Stripe with Floats.
Click to enlarge 2D cockpit view
Click to enlarge virtual cockpit
Take it for a FREE test flight
Like all of the other planes in our Premier Collection you can take these Tri Pacers for a test spin. Download and install then and you'll have 7 Days to "fly before you buy".
We're confident that after you fly it, you'll be soon rerturn here to order a Registration Key to unlock the trial expiration.
NOTE: During installation of any of our "Try Before You Buy" aircraft, we add a small program to your main FSX folder or FS2004 or FS2002 \modules folder to enable you to use these and future Premier Collection aircraft. If you do not want to add this program to your system, please do not install any of these aircraft.
Specifications
Wing Span: 29 ft, 4 in.
Length: 20 ft, 7 in.
Height: 8 ft, 4in.
Engine: One 125hp Lycoming O-290-D
Empty Weight: 1,100 lbs. (PA-22-150)
Maximum Take-off Weight: 2,000 lbs. (PA-22-150)
Maximum Cruise Speed: 114 kts
Stall Speed: 91 kts (no power flaps up) 64 kts (no power flaps down)
Rate of Climb: 725 ft/min
Ceiling: 15,000 ft
Range: 460 miles
